The CX506a is a multimeter designed for low-voltage circuit measurements and home electric appliances. This is a taut-band type meter (15μA) with internal magnet that features an all-plastic rigid body and wide range of measurement functions – 26 to be exact. It can measure DC voltages up to 1000 volts with an accuracy of ±2.5% of full scale, and AC voltages of up to 750 volts with an accuracy of ±3.0% of full scale.

Users can also use this multi-tester to measure DC current, resistances, and capacitances. The device also has a polarity reversal switch for DCV and DCA. The CX506a also features a transistor check function that allows the users to test their BJTs (Bi-junctional transistors).

The meter comes with two test leads (TL-21a), a clip lead (CL-506a), instruction manual, and a spare fuse with a rating of (250V/0.5A).

• Wide measurement functions 26ch switches
• Polarity reversal switch for DCV and DCA
• High-sensitivity taut-band meter (DC 50k Ω/V)
• Capacitance measurement by built-in transistor oscillator

The AP33 is a compact, analog multimeter suitable for measuring voltages and testing continuity of household appliances, and measuring voltages of electric light circuits, batteries, etc. The AP33 has an accuracy of ±5% of full scale in both AC & DC mode. The device can measure 500 volts maximum (DC & AC), and has a DC current range of 25m to 250mA. When testing power lines with the AP33 make sure not to exceed the 3.6 kVA rating. Avoid measuring lines with inductive voltages and surge voltages as they may exceed the maximum limit and damage the meter.

The device is made from elastomer material that absorbs shock from falls. It comes with high-durability nylon-woven copper test leads with removable caps feature for easier probing. It has a built-in fuse with a rating of 0.5 Amperes/250 volts, and a built-in battery (R03 (AAA battery) 1.5 V × 1).

Includes meter, test leads and instructions.

• Elastomer material absorbs shock from fall
• High-durability nylon-woven copper test leads
• Easy battery check (BAD or GOOD) for 1.5V and 9V

This multimeter is designed for low voltage circuits and has an average accuracy of 3% of full-scale reading. This device can measure DC voltages using the null reading or zero methods for both negative and positive readings, it can also measure DC current of up to 0.25A and can measure AC Voltage (1000V max). The YX-361TR is capable of measuring signal power in dB in the range of -10dB～+62dB. Users can also use it to check the continuity of a capable or a trace, for which an LED output is provided.

The device has an all-plastic rigid body that can withstand all kinds of environments. The instrument’s circuitry is protected by a replaceable (250V/0.5A) fuse.

Meter includes one set of test leads and instruction manual.

• Total 35 wide ranges (24 ch switch + additional functions)
• ±DCV zero center meter
• LED for continuity check
• Output terminal (series capacitor terminal)
• Battery check

The YX360TRF is a taut-band type meter designed for low-voltage circuit measurements. It can measure DCV, DCA, AC, resistance, capacitance(10uF), Load line current, Signal power in dB as well as high DC voltage of up to 25kV using an HV-10T probe (optional). When measuring DCV the meter utilizes the Null reading for ±25V with an accuracy of ±5% full-scale accuracy.

This multimeter has a solid cover that provides protection against drop shocks, and conveniently folds over to use as a tilt stand, and features a compartment for storing the attached test leads. For circuit protection, the device features a replaceable fuse rated at (250V / 0.5A).

Meter includes attached test leads and instruction manual.

• Drop shock proof meter
• Null (zero center) meter ±5 / ±25 in DCV
• High resistance up to 200MΩ with low voltage
• Solid & protective body cover that can also be used as a tilt stand
• Capacitance, dB, LI measurement