The DCL3000R has a unique design as it features a flexible conductor sensor that can be detached and looped around a wire or a conductor. The device is great for measuring currents across conductors in narrow spaces where a traditional clamp-meter might be difficult to use. This instrument is a True RMS AC clamp meter designed in compliance with IEC61010-1 CAT.IV 600V. It is suitable for measuring the current of electrical lines, and appliance power supply facilities operating on low voltages of no more than 600V. The device can measure a current of up to 3000 Amperes with accuracy of ± (3%+5) and has a maximum overload protection input of 5000 Amperes.

The instrument features a 3150-count large display with backlight. It also features Data Hold, and Range Hold features along with Max/Min value hold feature. The DCL3000R consumes 20mW of power and also features an Auto-power save feature that turns off the device after 15 mins of no operation.

Meter includes flexible conductor, carrying case and instruction manual.

• AC current measurable max. 3000A
• Maximum overload protection input AC 5000A
• 3150 Count Large LCD Display with Backlight
• True RMS
• Accuracy: ± (3%+5)
• Data hold
• Range hold
• Max/Min value hold
• Auto power save (15min.) (non-cancelable)

The Sanwa DCM2000DR is a digital clamp meter with digital multimeter capabilities.

The DCM2000DR is an AC/DC clamp meter/digital multimeter of the RMS value response type, designed for measurements in the range specified by IEC61010-1 CAT.IV 1000V. It is suitable for current and voltage measurements of low-voltage circuitry, electric equipment, and power supply facilities.

This instrument is capable of measuring both AC and DC currents and voltages. As the device also functions as a multimeter, it can perform a variety of functions such as measuring resistances, frequency, capacitances, performing diode tests as well as continuity tests with buzzer alarms.

The device can also measure electric field strength and features a low pass filter for VFD (Variable Frequency Drive) AC voltage measurement. The DCM2000DR has data hold, range hold and peak hold functions as well. The device is power efficient and features an auto power save feature that turns off the display after 34 minutes of inactivity (cancellable).

Includes meter, one set of test leads, carrying case and instructions.

• AC/DC current measurable max. 2000A & DMM function
• True RMS
• 6000 Count Digital Display with Backlight
• Dual display shows voltage/current and its frequency
• EF (Electric Field) sensing
• VFD (Variable Frequency Drive) frequency measurement
• Low input impedance voltage measurement capable of attenuating the effects of ghost voltage
• Data hold / Range hold / Peak hold (5ms)
• Relative value
• Auto power save (34min after the last operation) (cancelable)

This DCM600DR can measure a maximum of 600 Amperes of AC/DC current. It can measure AC/DC current up to 600 Volts, the resistance of 999.9Ω, and perform continuity tests with a buzzer alarm. This device is suitable for current and voltage measurements of low-voltage circuitry, electric equipment, and power supply facilities.

The device offers various functions such as data hold, peak hold, zero, etc. It features a 6000-count display with a back-light feature. The device also has an auto-power save feature that turns the screen off after 30 minutes of no use.

Meter includes one set of test leads, carrying case and instruction manual.

• AC/DC current measurable max. 600A & DMM function
• True RMS
• 6000 count LCD with Backlight
• Data hold
• Relative value
• Peak hold (1ms)
• Auto power save (30min after the last operation) (non-cancelable)

The DCL1200R is an AC clamp meter/digital multimeter of the RMS value response type, designed for measurements in the range specified by IEC61010-2-032 CAT.III 600V. It is suitable for current and voltage measurements of low-voltage circuitry, electric equipment and power supply facilities.

This clamp-meter can measure AC current of up to 1200 Amperes with an accuracy of 1.7%. It has a 6000-count display with a backlight. The device is also a digital multimeter that can measure AC/DC voltages, frequency of up to 30 kHz and capacitance, and it also has an Auto resistance feature that allows users to automatically measure resistances without the need for changing the range. The device can also perform Diode and Continuity tests (with a buzzer). It can also wirelessly detect voltages of 15 V and above at 50/60 Hz.

The DCL1200R is compliant with the IEC61010-2-032, CAT.III 600V, IEC61010-031 safety standards, and IEC61326-1 EMC directives.

Includes meter, test leads, carrying case and instructions.

• AC current measurable max. 1200A & DMM function
• 6000 Count Display
• True RMS
• EF (Electric Field) sensing
• Large LCD with Back light
• Data hold
• Range hold
• Auto power save(3～) (non-cancelable)
• Lightweight approx. 290g

The DCM660R can be used in a CAT III environment and can measure a current of up to 660 Amperes. Since this instrument also has digital multimeter functionalities it can also measure AC+DC voltage, resistance, and frequency as well as perform continuity tests.

The device uses the double integration operation method and True RMS for AC measuring. The display on this device is a large 6600-count LCD display with backlight. The DCM660R has a safety design compliant with the IEC61010-1 standard.

Meter comes with one set of test leads, carrying case and instructions.

• AC current measurable max. 660A & DMM function
• True RMS
• 6600-Count LCD with Back light
• Data hold
• Relative value
• Max/Min value hold
• Inrush current measurement
• Auto power save (15min after the last operation) (non-cancelable)
• IEC compliant

The DCL1000 is suitable for current and voltage measurements of low-voltage circuitry, electric equipment, and power supply facilities. This instrument is an AC clamp meter/digital multimeter, designed for measurements in the range specified by IEC61010-2-032 CAT.III 600V. The clamp current sensor in the DCL 1000 can measure a max current of 1000A. It features a large 4000-count display, a Data Hold function for pausing a reading on the screen, and Range Hold for manually changing the device’s range.

This device also functions as a Digital Multimeter with essential features such as measuring AC and DC voltages with 3% accuracy, Resistance of up to 40MΩ, and a continuity test with a buzzer alarm.

The device is very portable, it has dimensions of H238 x W95 x D45mm and weighs approximately 290 grams which is lighter than a conventional clamp meter.

Meter includes (TL-23a) test leads, a carrying case (C-DCL1000), and instruction manual.

• AC current measurable max. 1000A & DMM functions
• Large LCD
• Data hold
• Range hold
• Relative value
• Auto power save (30min.) (non-cancelable)
• Lightweight approx. 290g
• Design compliance with IEC

Description

The DCM400 is a digital AC clamp meter is designed for the IEC measurement category CAT. III 300V, and it is suitable for measuring low-voltage circuits. Along with measuring AC currents, the DCM400 is capable of measuring AC and DC power up to 600 Volts. It can also measure resistance, frequency, and continuity with a buzzer alarm.

The device has a 4000 count / 42 segment analog bar graph display. It features a hold option to pause a measurement on the display. The device also has an auto-power off feature that turns it off after 30 minutes of no operation.

Meter includes one set of test leads, carrying case and instruction manual.

• 4000 count / 42 segment analog bar graph
• Clamp opening size: 25mm
• Frequency measurement by clamping and using test leads
• Data hold
• Continuity check buzzer
• Auto power off (30min)
• Low batter power indication

The DCM400AD is an AC clamp meter designed for the IEC measurement category CAT. III 300V, and it is suitable for automotive maintenance & digital multimeter functions. The device can measure both AC and DC currents as well as AC and DC voltages. It can also measure the resistance of up to 400Ω and perform continuity tests.

The device has a 4000-count display with a 42-segment analog bar graph. The DCM400AD also offers functions such as the hold function for pausing a reading on the screen, range hold for manually changing the measurement range, and zero-function for removing or adding any offset values when measuring.

Includes meter, one set of test leads, carrying case and instruction manual.

• 4000 count display with 42 segment analog bar graph
• Clamp opening size: 25mm
• DC/AC current 40A/400A
• Data hold
• Relative value
• Continuity check buzzer
• Auto power off (30min)
• Low batter power indication